สติกเกอร์ไวนิล ลาย JDM Drift Barcode สำหรับติดรถยนต์
Features:
Can be applied to almost any clean smooth surface! Windows cars trucks laptop etc
Simply lay the decal flat on the ground and peel off the decal from the back when you apply it on the vehicle
Youll need to clean the surface with some soap water and use a squeegee when applying the decal
The installation is a two-person job so professional installation is recommended
Application Instructions:
1 Clean the surface where the decal will be installed
2 Slowly remove the protective paper making sure that its label remains anchored to the transparent transfer belt. if part of your label is raised with the backrest press the paper down against it until it is stuck to the transfer belt.
3 Once your label is peeled off the back line and position your decal against the surface to which it will be applied.
4 Use a credit card squeegee or something similar to smooth your tattoo making sure it is completely stuck to the surface.
5 Carefully and Slowly remove the transfer sheet from the label making sure that its label is affixed to the surface. If you see a part of the decal does not release the transfer belt press down to the surface and repeat the process.
Specifications:
Material: PET
Color: White/Black
Size：Length: 14cm（5.51in） Wide: 5cm（1.97in）
Quantity: 1 Pc
Note:
Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid
Due to the difference between different monitors the picture may not reflect the actual color of the item. Thank you!
Package inclued: (Without retail package)
1 Pc x Car Sticker
(4.63)
(4.5)
(3.6)