Foreverlily ส่ง 1-3 วัน ปืนสเปรย์แอร์คอมเพรสเซอร์ ขนาดเล็ก 0.4 มม. สามารถใช้สําหรับการเพิ่มประสิทธิภาพเล็บ เพื่อความงามของผิวหนัง เค้ก ทําเลโก้ ระบายสี แอร์คอมเพรสเซอร์ แปรงทําความสะอาด

Specification

Item Type: Oxygen Injector

Color: Gold/Black/Red/Rose

Material: Aluminum Alloy

Rated Power: 7.4V/8-10A

Product Type: Single Action

Air Pressure: ≥150Kpa

Nozzle diameter: 0.4mm

Battery Capacity: 800mAh

Charging Time: 1 Hour

Using Time: 20-30 Minutes

Weight: 285g

Size: 14.5*11.5*4.5cm/5.7*4.5*1.8in

Product Include

1*Main Machine

1*Spray Gun

3*Water Tank

1*USB Cord

1*Box

Feature

1.Comprehensive Skin Care. Adopts 150kpa high pressure to effectively clean face inject oxygen replenish moisture and import nutrients. It maintains an ideal injecting effect while ensuring no irritation & harm are caused.

2.Fresh Oxygen Injection. The powerful spray it emits can rinse away stubborn dirt oil and dead skin deep in pores letting the skin breathe fresh oxygen freely and become bright.

3.Nano Mist Hydration. Water is atomized into ultra-small particles which are smaller than pores and can easily penetrate multiple layers to reach deep skin significantly quenching its thirst.

4.100% Nutrient Import. Facial mask toner essence... It can be used to double the absorption of cosmetics and save their required amount. You needs merely a few drops of a liquid cosmetics to finish a whole-face spraying.

5.Makes Your Life Easier. Tattoo manicure cake makeup... As a multifunctional device it can be used to color whichever thing you want in your daily life filling it with more joy and convenience.

Operation

1.Install the spray gun and the tank.

2.Fill the tank with some water.

3.Rotate the knob to adjust spray volume.

4.Push back the paddle to enjoy.

Note: This is a single-action model. It is normal for the spray gun to spray air when it is turned on and the solution will spray only when you pull the paddle down and back.

Caution

1.Do not use the product when charging it.

2.To avoid bacterial pollution it is recommended to clean the product with warm water or alcohol before use.

3.Do not add any cosmetics other than liquid ones. High-concentration product must be diluted with mineral water.

4.To avoid nozzle clogging every time you finish spraying you should: ①pour out the remaining liquid in the tank; ②add clean water and spray it (until there’s no spray coming out); ③spray air to completely dry the tank.

5.Only use water-soluble pigments clean in time after each use otherwise it will be clogged

6.Note: This is a single-action model. It is normal for the spray gun to spray air when it is turned on and the solution will spray only when you pull the paddle down and back.