TTL to RS485 level serial UART module
TTL to RS485 level serial UART module
SCM TTL to RS485 module 485 to serial UART level Huzhuan automatic hardware flow control. The entire network of 3.3V and 5.0V power supply signal perfectly compatible RS485 automatic flow control module Without collection - made control with the use of this module is as simple as you operate the serial
Module Highlights TTL to RS485:
3.3V perfectly compatible with 5.0V power supply
3.3V and 5.0V signal perfectly compatible
Absolute using imported chips industrial grade design excellent robustness while using more efficient 485 lightning protection design can be used in harsh industrial field and field of environment working temperature of -40 ℃ to + 85 ℃ the transmission distance of up to kilometers (850 meters with 2 * 1.5 cable to do the test it is recommended to use in the 800 meters more than 800 m please add repeaters)
semi-hole process design thickness of 0.8mm makes it easy to use as a picture board can be welded using terminals
having RXD TXD signal lights panoramic view of the transceiver status
Module Features TTL to RS485:
This module fully into account the 485 bus lightning protection design and anti-jamming design in the wild long-distance transmission the module earthed side to earth it can play a good role of interference and lightning protection make 485 buses safer; we can not connect with the ground when the indoor short-distance transmission.
using the standard 2.54 pitch design easy secondary development
having a 120 Euro matching resistor shorting R0 to enable termination resistors when long-distance transmission is recommended shorting.
Support multi-machine communication allowing access at up to 128 on a device bus
The modules can be hot-swappable it does not appear other 485 chips hot plug signal dead bolt phenomenon
a large area of copper to prevent signal interference